The chemistry of electrogenerated transition metals species - the insertion of olefins into a nickelcarbon bond

The nickel(1) complex, Ni(teta)⁺, formed by cathodic reduction of the corresponding nickel(11) complex, reacts rapidly with alkyl bromides to form an unstable intermediate containing a nickelcarbon bond. When the electrolysis medium also contains an activated olefin an insertion reaction occurs. The new metalcarbon bond is cleaved by further reduction and overall the reduction of Ni(teta)²⁺ in the presence of RBr and CH₂CHY leads to high yiels of RCH₂CH₂Y.     

Aggregation and solubility behavior of asphaltenes and their subfractions

Asphaltenes from four different crude oils (Arab Heavy, B6, Canadon Seco, and Hondo) were fractionated in mixtures of heptane and toluene and analyzed chemically, by vapor pressure osmometry (VPO), and by small angle neutron scattering (SANS). Solubility profiles of the asphaltenes and their subfractions indicated strong cooperative asphaltene interactions of a particular subfraction that is polar and hydrogen bonding. This subfraction had lower H/C ratios and modestly higher N, V, Ni, and Fe contents than the less polar and more soluble subfraction of asphaltenes. VPO and SANS studies indicated that the less soluble subfractions formed aggregates that were considerably larger than the more soluble subfractions. In general, asphaltene aggregate size increased with decreasing solvent aromaticity up to the solubility limit, beyond which the aggregate size decreased with heptane addition. The presence of a low wavevector Q feature in the scattering curves at 25 degrees C indicated that the individual aggregates were flocculating; however, the intensity of the feature was diminished upon heating of the samples to 80 degrees C. The solubility mechanism for Canadon Seco asphaltenes, the largest aggregate formers, appears to be dominated by aromatic pi-bonding interactions due to their low H/C ratio and low nitrogen content. B6 and Hondo asphaltenes formed similar-sized aggregates in heptol and the solubility mechanism is most likely driven by polar interactions due to their relatively high H/C ratios and high nitrogen contents. Arab Heavy, the least polar asphaltene, had a H/C ratio similar to Canadon Seco but formed the smallest aggregates in heptol. The enhancement in polar and pi-bonding interactions for the less soluble subfraction indicated by elemental analysis is reflected by the aggregate size from SANS. The less soluble asphaltenes contribute the majority of species responsible for aggregation and likely cause many petroleum production problems such as pipeline deposition and water-in-oil emulsion stabilization.     

P and H NMR studies of the transesterification polymerization of polyphosphonate oligomers

Polymeric phosphonate esters are an interesting class of organophosphorus polymers because both the polymer backbone and phosphorus substituents can be modified. These polymers have been prepared by ring-opening polymerizations of cyclic phosphites, stoichiometric polycondensations of dimethyl phosphonate with diols in conjunction with diazomethane treatment and by transesterification of polyphosphonate oligomers. Our initial attempts to prepare high molecular weight polymeric phosphonate esters by the transesterification methods were unsuccessful. Results indicate that the reactions of dimethyl phosphonate with diols to form polyphosphonate oligomers with only methyl phosphonate end groups are plagued by a serious side reaction that forms phosphonic acid end groups. These end groups do not participate in the transesterification reaction and limit the molecular weights of the polymers that can be obtained. The phosphonic acid end groups can be converted into reactive methyl phosphonate end groups by treatment with diazomethane, however diazomethane is explosive and the polymerization is slow. An alternative route for the production of high molecular weight polymers is the transesterification of the 1,12-bis(methyl phosphonato)dodecane, formed by the reaction of excess dimethyl phosphonate and 1,12-dodecanediol, with a Na₂CO₃ promoter. This allows polymers with molecular weights of up to 4.5×10⁴ to be prepared, and no phosphonic acid end groups are observed in these polymers. Thermal analyses of the poly(1,12-dodecamethylene phosphonate) have shown that this polymer has reasonable thermal stability (onset of thermal decomposition at 273 °C). This polymer also undergoes a cold crystallization process at 15 °C similar to that which has been observed in some polyesters, polyamides and elastomers.     

Structure and magnetism of a new pyrazolate bridged iron(II) spin crossover complex displaying a single HS-HS to LS-LS transition

The dinuclear iron(II) complex [(pypzH)(NCSe)Fe([micro sign]-pypz)(2)Fe(NCSe)(pypzH)].2H(2)O displays a single, sharp spin crossover transition between the [HS-HS] and [LS-LS] states and is structurally characterised above and below the T(1/2)= 225 K value     

Intercrystalline links in polyethylene crystallized from the melt

Intercrystalline links in polyethylene have been revealed by crystallizing from the melt mixtures of fractionated polymer and the linear hydrocarbon n-C₃₂H₆₆, the latter constituent being removed later by washing at room temperature in an organic solvent. These fibrous links measure up to 15,000 A. in length and are 30–300 A. in thickness. Molecular chains are oriented parallel to the lengths of the links, and apparently nucleate on tie molecules formed by the simultaneous crystallization of different parts of the same molecule on the surfaces of different, and often widely separated, crystals. The maximum length of the links found in a given polymer varies as the square root of molecular weight, and there are indications that molecules in the melt are much more extended than is predicted by conventional configurational statistics. The links are under tension and presumably exert a significant influence on physical properties.     

On-line LC-GC-AED and LC-GC-MS – multidimensional methods for the analysis of PAC in fuels,combustion emissions and atmospheric samples

The composition and concentration of polycyclic aromatic compounds (PAC) in fuels. Theier combustion products and in the atmosphere remains a topic of considerable interest. Despite the wealth of literature on the identification of PAC, speciation at low concentrations remains difficult due to instrument limitation and the complexity of fuel and environmental samples. Consequently on line sample preparation procedures (SPE, SFE, LC, etc.) are becomeing an increasingly important step in the analysis procedure particularly where sample clean-up and fractionation are essential for improving analytical resolution. In this study a normal phase high pressure analytical resolution. In this study a normal phase high pressure liquid chromatography-gas chromatography (LC-GC) system has been developed to provide quantitative analysis of samples, as diverse as coal liquids, petroleum fuels, diesel exhaust particulates, and urban air particulates. Separation and identification of parent and alkylated PAH, hetercycline nitro-and oxy-PAC can be achieved by direct coupling to an atomic emission detector and a bech top mass spectrometer. For both systems the primary LC separation combined with the large sample volume transferred to GC vastly improves detection limits. Furthermore the complimentary nature of the two detectors used enables the positive indentification of many unknowns.     

An investigation into the construction of molecular models by the template joining method

Summary The results of a wide-ranging investigation into some of the different methods available for performing the joining of templates to build molecular models show that the choice of algorithm can significantly affect the quality of the results obtained, and different algorithms are most suited to particular categories of join.     

Asymmetric epoxidation using a singly-bound supported Katsuki-type (salen)Mn complex

We have successfully prepared an unsymmetrical analogue of a Katsuki-type salen ligand having a single hydroxyalkyl group at its 6-position, and also its Mn(III) complex; attachment of the complex to a polymer gives a highly enantioselective and recoverable catalyst for epoxidation of 1,2-dihydronaphthalene.     

Lithiation of 2-Alkyl-3-amino- and 2-Alkyl-3-(methylamino)-4(3H)-quinazolinones(1)

3-Amino-2-methyl-4(3H)-quinazolinone has been doubly lithiated, on nitrogen and in the 2-methyl group, with n-butyllithium. The lithium reagent thus obtained reacts with a variety of electrophiles (D(2)O, benzophenone, cyclohexanone, cyclopentanone, acetophenone, benzaldehyde, tetraisopropylthiuram disulfide (TITD)) to give the corresponding 2-substituted derivatives in very good yields. Reactions of the dilithio reagent with 2 molar equiv of methyl iodide or phenyl isocyanate give disubstituted derivatives. Double lithiation of the 2-ethyl and 2-propyl analogues have been achieved using LDA, and subsequent reactions with most electophiles are then similar. In the reaction of the dianion of the 2-ethyl compound with TITD, deamination from position 3 takes place with the formation of the 2-substituted derivative. In reactions with prochiral ketones, the dianion of the 2-ethyl compound gives very high diastereoselectivity. Lithiation and subsequent reactions of 3-(methylamino) analogues take place in a similar manner, thus providing access to a range of substituted 3-(methylamino)-2-alkyl-4(3H)-quinazolinones by a general procedure. Lithiation of 3-(dimethylamino)-2-ethyl-4(3H)-quinazolinone did not take place under similar conditions. Lithiation of 3-amino-2-unsubstituted-4(3H)-quinazolinone was also unsuccessful.     

Relative molecular mass information from aliphatic nitro compounds: A chemical ionization study

The mass spectra of a number of aliphatic nitro compounds have been studied using electron Ionization (EI) and a variety of chemical Ionization (CI) techniques in attempts to obtain relative molecular mass information. The use of positive ion ammonia chemical Ionization techniques gave very satisfactory results, providing abundant [M + NH4]⁺ ions, not only from both primary and secondary nitro compounds, but also from the much more labile tertiary nitro compounds. However, the use of methane and isobutane positive ion CI or EI conditions resulted in facile fragmentation with little relative molecular mass information being made available. Negative ion CI using methane, isobutane or ammonia as moderating gases all gave abundant [M ? 1]^? ions with primary and secondary nitro compounds but at much reduced sensitivity.